Q Where can the waste be discharged to ?

All of Saniflo products are designed to pump out the waste into a sewer, septic tank or vent stack.

Q What type of pipe should be used for waste discharge ?

Saniflo recommends to use uPVC piping.

Q What size discharge pipe should be used ?

Depending on the pump model, the discharge pipe can be 20-40mm diameter pipe.

All macerators utilize 20mm uPVC.

All grey water pumps utilize 25mm uPVC.

Sanicubics utilize 40mm uPVC.

Q Do Saniflo products require a vent ?

Saniflo products require venting to atmosphere.

As per national plumbing codes.

Q Is periodical servicing required ?

Periodical servicing should be considered depending on frequency of use.

However, in areas with "hard" water (heavy mineral content), we recommend the use of descalant.

Q What are the electrical requirements ?

All of our products are manufactured with a standard moulded three pin plug and requires 220/240 volts power supply.

The Sanicubic Classic/Pro requires 220/240 volts powersupply, however it must be hard wired.

Q What is a macerator ?

A macerator is designed to shred sewage waste and WC paper into tiny particles, forming a fine slurry that is then discharged through 20mm uPVC pipe work.

Q Do I need to break up the floor to install a Saniflo product ?

There is no need to break up the floor. Saniflo can easily be installed anywhere on a finished floor.

Q What are grey water pumps ?

Grey water pumps are designed to handle waste water discharge from vanities, showers, bathtubs, washing machines, dishwashers, kitchen sinks, laundry tubs but not a toilet.

Q Are there different colors available ?

All Saniflo products are available in white only, except for the Sanicubic Classic which comes in gray, as well as the Sanispeed.