SANIFOS 610

The Sanifos 610 GR  is a packaged pumping station suitable for single dwelling residential or commercial use. It is an efficient solution where gravity reliant sewerage are not possible due to limited site access and site constraints such as property sloping away from the sewer infrastructure

Designed for drainage of single dwellings or multiple storeys, incorporating WC, bathroom, kitchen, utility room

  • Single phase pump with cutter macerating technology
  • Pumps up to 11 metres vertical with a maximum of 48 cubic metres per hour flow rate
  • Fully packaged including alarm

SANIFOS Digital Catalogue



Application

  • Commercial use
  • Community use
  • Individual use

SANIFOS® 610 GR is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling with multiple storeys including bathroom, kitchen, utility room etc. It comes with a load balanced cutter with high performance characteristics to prevent clogging. It boasts a powerful automatic motor with quiet operation. 


The Sanifos 610 GR has a 610 litre storage tank which is high-density polyethylene and offers high mechanical resistance and is resistant to chemical attack. It offers easy handling for installation below ground level. The Sanifos 610 GR has six inlets that can take up to 125 mm, and it discharges through 40 or 50 mm pipework. The Sanifos comes with a 2 year warranty.


SANIFOS® 610 GR comes with a smart control box, tank with pre mounted hydraulics s, 2 isolation valves, 2 non-return valves and 3 floats installed in the tank. It also comes with an external wired alarm for added peace of mind. It offers 4 drilling zones to allow access into the tank where needed for your project and extensions are available for the Sanifos should they be needed.


Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo

Data sheet

Inlet diameter
6 inlets Ø ext. 50/40/100/110/125
Motor power
1500 W
IP rating
IP68
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Vent diameter
2 x Ø ext. 75
Materials
Polyethylene
Activation method
Float
Check valve
Yes