Sanicubic 2 Pro
The Sanicubic 2 Pro is a high performing macerator pump that enables the removal of grey and black water from any commercial premises from a distant basement. It contains two separate, load balanced pumps with high performance macerating systems and will operate alternatively. In the event of inflow overload, both motors run at the same time or in the unlikely event that one motor fails, the other one will take over.
- Discreet installation
- Various configurations possible
- Certified watertightness
- Remote control as standard
The Sanicubic 2 Pro has ProX K2 shredder technology which reduces clogging.
The two motors enable operation in all circumstances.
Its 5 inputs make it possible to connect all the sanitary facilities required.
Click here for other models in the
Sanicubic 2 Pro datasheet
|Sanicubic 2 Pro|
|Type of control box||Classic|
|Pump housing||PA 12 GF|
|Motor housing||PA 12 GF|
|Power consumption P1||1500 W|
|Power output P2||1050 W|
|Mode of operation||S3 30%|
|HMT max.||13 m|
|Maximum flow rate||15 m³/h|
|External inlet diameter||40, 50, 100, 110 mm|
|Discharge diameter ext.||50 mm|
|Ext. ventilation diameter||50 mm|
|Total volume||45 L|
|Useful volume||17.5 L|
|ON/OFF level||140/70 mm|
|Alarm level||210 mm|
|Max. incoming temperature||70 °C (5 mins)|
|Type of wheel||Grinder|
|Type of activation||Pneumatic|
|Gross weight||35 kg|