SANIFLOOR+ 3, for extra-flat shower trays.

Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and a choice of four waste designs. It can pump up to 3m vertically or 30m horizontally. Higher flow rate means it can be used with powerful ‘rain head’ showers.

  • Wireless communication between the pump and plug for easy installation.
  • Easy to maintain replaceable detection module
  • Installation without the need for major work: small, local excavation: small evacuation diameter (32 mm)
  • Large volume output 30 l/min (compatible with rainwater)

SANIFLOOR+ includes a suction pump and a plug, and makes it possible to install a walk-in without the need for major building work. The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance.

The SANIFLOOR+ has 4 versions for all the floor coverings on the market.

- SANIFLOOR+ 1 for tiled floors

- SANIFLOOR+ 2 for flexible floors

- SANIFLOOR+ 3: For extra-flat shower trays

- SANIFLOOR+ 4 Wedi®: for Wedi® tiled shower trays

SANIFLOOR+ 3 datasheet

Number of available inlets
Inlet diameter
16 mm
Recommended discharge pipe diameter
25 mm
Motor power
Supply voltage
Electrical class
IP rating
Sound level
Maximum horizontal discharge
30 m
Maximum vertical discharge
3 m
Activation level

Dimensions l x w x h (mm)
295 x 191 x 164

*Packing list: SANIFLOOR+ pump, dedicated drain, check valve, connectors. 

Ref: EAN 3308815076164

SANIFLOOR+ 3, for extra-flat shower trays.

  • Shower
  • Walk-in shower