

Sanifloor + allows a shower to be installed easily and economically without major work accessing sewer pipes. The pump sucks the water from the shower gully and discharges back to the existing sewer line. Installing a stylish walk-in shower is easy with a Sanifloor®+
To maintain radio signal integrity pump must be installed in same room with power cable end facing towards shower waste gully.
Sanifloor + includes a suction pump and a plug, and makes it possible to install a walk-in shower without the need for major building work. The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance.
The Sanifloor + has 3 versions for all the floor coverings on...
See more
Dimensions l x w x h (mm)
295 x 191 x 164
*Packing list: Sanifloor+ pump, dedicated drain, check valve, connectors.
Ref: EAN 3308815076164
Sanifloor + 3 | |
---|---|
Number of entries | 1 |
Inlet pipework | 16 mm |
Discharge pipework | 32 mm |
Motor power | 400W |
Voltage | 220-240 V |
Frequency | 50 Hz |
Maximum absorbed current | 1.7 A |
Electrical class | I |
IP rating | IP44 |
Max. temperature of the pumped liquid (5 min) | 35 °C |
Discharge length | 30 m |
Max. head (Q0) | 3 m |
Shower tray height | 0 cm |
Total height | 57 mm |
Materials used for the drain | ABS / stainless steel |
Outlet diameter of the drain | 16 mm |