SANICOM® 2

Ideal for intensive use

  • Compact design
  • Ability to pump water of up to 90°C.
  • Comes with remote control:
  • 2 pumps in alternate use for more intensive use.

SANICOM® 2 is a dual-motor lift station for draining wastewater from bathrooms (not toilet), kitchens, and laundries.

 

SANICOM® 2 has two independent pumps. Its second motor will relieve the first one by engaging when too much water enters the pump.

 

The SANICOM® 2 is advisable for intensive use.

 

With its two motors, SANICOM® 2 is ideal for the intensive use at a business or a place used for receiving the public. This floor-standing pumping station is made in France at the Brégy (60) SFA factory. It has thus received the Guarantee of French Origin.

SANICOM® 2 datasheet

Inlet diameter
• Top rear inlet: Ø ext. 50 et Ø ext. 40 • Bottom side inlets: Ø ext. 75, Ø ext. 50 et Ø ext. 40
Motor power
2 x 1500 W
Supply voltage
220-240V/50Hz
Electrical class
1
IP rating
IP44
Activation level
145 mm
Maximum absorbed current
13 A
Maximum incoming water temperature
90 °C intermittently (max 5 min)
Discharge pipe diameter
DN50 (Ø ext. 50 mm)
Weight (including accessories)
26 kg
Maximum recommended depth
11 m
Tank volume
34.5 L
Vent diameter
50 mm