SANIFLOOR 1, for tiled floors

Sanifloor®+ allows a shower to be installed easily and economically without major work accessing sewer pipes. The pump sucks the water from the shower gully and discharges back to the existing sewer line. Installing a stylish walk-in shower is easy with a Sanifloor®+

  • Wireless communication between pump and plug
  • Installation without the need for major work
  • Large volume output 30l/min

To maintain radio signal integrity pump must be installed in same room with power cable end facing towards shower waste gully.


  • Shower
  • Walk-in shower

SANIFLOOR+ includes a suction pump and a plug, and makes it possible to install a walk-in shower without the need for major building work. The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance. Designed specifically where floor drainage is required but where space underneath is very limited. This two part kit with a powerful shower waste pump and a choice of four waste designs

The SANIFLOOR+ has 3 versions for all the floor coverings on the market.

- SANIFLOOR+ 1 for tiled floors

- SANIFLOOR+ 2 for flexible floors

- SANIFLOOR+ 3 For extra-flat shower tray

SANIFLOOR+ 1 datasheet

Number of available inlets
Inlet diameter
16 mm
Recommended discharge pipe diameter
25 mm
Motor power
Supply voltage
Electrical class
IP rating
Shower tray height
Sound level
Maximum horizontal discharge
30 m
Maximum vertical discharge
3 m
Activation level

Dimensions l x w x h (mm)
295 x 191 x 164

*Packing list: SANIFLOOR+ pump, dedicated drain, check valve, connectors. 

Ref: EAN 3308815076232